Rolls of conductive grid tape designed to shield electronic components from electromagnetic interference

Conductive Grid Tape

Width

1/2"
3/4"
1"
2

Overview

Botron’s Conductive Grid Tape is specifically designed to combat electromagnetic interference (EMI). EMI can cause electronic components to act up and interfere with performance. Every exposed pin and lead on a PCB is an antenna and will pick up EMI from the surrounding environment. Conductive Grid Tape effectively shields EMI sensitive components from electromagnetic interference.

Layer by Layer

A thin conductive grid, working as shield to EMI, is sandwiched between two layers, an outermost low charging clear cellophane and specially formulated low charging adhesive.

Fight Back!

The conductive grid acts as both a faraday cage for protection against static fields and shielding against electromagnetic energy.

Skinny Ones, Wide Ones

Available in multiple widths, 2”, 1”, ¾”, and ½”.

Extremely Low Charging

Conductive Grid Tape produces very little charge when peeling and stripping from board level components.

Technical Information

Material

3 Layer Copolymer

Adhesive

Acrylic-Based

Thickness

1.9 - 2mil

Width

1/2", 3/4", 1", 2"

Length

39 yards (118')

Core

3"

Surface Resistance

  • Copolymer Layer <1012
  • Adhesive Layer <109
  • Grid Layer <105 @50% RH

Static Generation

<0-50 volts @50%RH

Adhesion

66oz/in

Tensile Strength

270N/mm sq.

Elongation

160%

Standards

ANSI/ESD S541

Temperature

140° F (60° C)

Color

Tan w/ Black Grid Pattern