Digital/Analog Audit Kit
Overview
Botron's Digital/Analog Audit Kit insulation and continuity tester is designed for electrical testing. The wide range of test voltages makes the Audit Kit ideal for users involved with ESD testing. The kit gives greater functionality with simplified operation and an ergonomically designed case.
Selectable Voltage
Test voltages of 10V, 25V, 50V, 100V, 250V and 500V.
Timed Testing
Function automatically tests to a time limit.
Test Inhibit
Prevents tests from going ahead if connection to a dangerous live circuit is found (works even when fuses are blown).
ESD Display
Swap display from kΩ, MΩ, GΩ to 105, 106 etc.
Adjustable Buzzer
Set to buzz if the insulation resistance is above a user-adjustable limit or even configure for continuity.
Rugged
Tough housing with shock absorption and almost indestructible, weatherproof ABS casing.
Technical Information
Insulation
Nominal test voltages
Range Full Scale Accuracy
Analogue Range
Short Circuit Current
Terminal Voltage
Test Current on Load
Leakage Current Range
Leakage Current
Voltage Display
Dielectric Absorption Ratio (DAR)
Continuity Accuracy
Open Circuit Voltage
Test Current
- 205 mA (±5 mA) (0.01 Ω to 9.99 Ω)
- 20 mA (±1 mA) (10.0 Ω to 99.9 Ω)
Lead Resistance Zeroing
Buzzer
Resistance
- 0.01 kΩ to 1000 kΩ (0 to 1 MΩ on analogue scale)
- Accuracy: ±3% up to 50 kΩ then ±5% ±2 digits
- Open circuit voltage: 5V ±1V
- Short circuit current: 1.5 mA ±0.2 mA
Voltage Range
Default Voltmeter
- Operates at >25 volts a.c. or d.c., on any range except OFF
- Frequency: 15-400Hz (15Hz - 99,9Hz) ±0.5% ±1 digit(100Hz to 400Hz)
Power Supply
Battery Life
Temperature
- Operating range -20ºC to +55 °C
- Operating humidity 95% RH at 0ºC to +35ºC, 70% RH