Stack of silver metal-in static shielding bags designed for ESD protection with electrostatic discharge symbols, suitable for sensitive electronic components

Metal-In Shielding Bags

Size

8" x 12"
10" x 14"
10" x 12"
6" x 10"
6" x 8"
5" x 8
4" x 8"
4" x 6"
3" x 5"

Zip Flat

Flat
Zip

Overview

The metal-in formulation of Botron Anti-static Shielding Bags protects components from EMI interference and ESD risk that metal-out bags can. Metal-in construction fully isolates its contents inside preventing risk of contact with charged conductors or unintended paths to ground.

The inner and outer film of Botron’s Anti-static Shielding Bags is low tribocharging, charges that can occur during handling are drastically reduced. Additionally, the anti-static film is low capacitance, meaning not only will it not hold a large charge, any charge buildup will be quickly dissipated.

Built Tough

Reliable burst, puncture, pull and tear strength.

Layer by Layer

5-Layer formulated to maximized ESD protection.

TGIF

Thank goodness it’s Faraday! The Faraday effect a metal-in bag provides shields not only electrostatic fields, but EMI as well.

Be Aware

Bright yellow classic ESD awareness logomark.

Technical Information

Material

  • Outer Layer - Polyester
  • Inner Layer - Polyethylene
  • Shielding Layer - Aluminum

Surface Resistivity

  • Outer Layer - <1011
  • Inner Layer - <102
  • Shielding Layer - <1011

Static Shielding

<25 nJ

Charge Generation

  • Teflon - 0.09 nC/sq. in.
  • Quartz - 0.01 nC/sq. in.

Capacitance Probe

to dissipate 1 KV

<30V

Thickness

.003" (.076mm) ±10%

Interior Dimensions

± .125"

Light Transmission

>40%

Burst Strength

>50 psi

Heat Seal

>10 lbs./in.

Seam Strength

Pass

Tear Strength

>25 lbs.

Puncture Resistance

>10 lbs.

MVTR

Moisture vapor transmission rate

<0.40

OTR

Oxygen transmission rate

<6.1

Abrasion Resistance

>100 Cycles

Outgassing

Pass

Non-Corrosive

Pass

Standards

ANSI/ESD S451

Color

Silver